This course entitled “ASME B31 Series and Pipeline Construction” under the specialization entitled “Design of Industrial Piping Systems” is aimed to cover power, process, and transportation ASME B31 code sections and activities involved in standard cross-country pipeline construction. First, the evolution of the ASME B31 Pressure Piping series is covered as it is important to know and all the code sections under ASME B31 Pressure Piping are mentioned in this course. The layouts of the code sections namely ASME B31.1, ASME B31.3, and ASME B31.4 are elaborated to address the design procedure of power, process, and liquid transportation piping systems to comply with the requirements mentioned in these code sections. The learners get familiarized with the chapters and their paragraphs, mandatory and non-mandatory appendices of these three code sections.
The activities involved under cross-country pipeline construction such as Right of Way, Clearing, Grading, Stringing, Trenching, Lowering, Backfilling, Tie-in, Welding, Bending, Non-destructive Testing, Field Joint Coating, Cathodic Protection, Special installation on pipelines like Markers, and Cleanup are explained. The equipment and crew involved in performing these activities are provided in this course. It increases the awareness about these activities among the learners.
The cathodic protection system to control the corrosion of buried cross-country pipelines is covered. The limitations of the open-cut method, the Horizontal Directional Drilling technique for horizontal earth borings, thrust boring, and micro-tunneling techniques are discussed. The hot tapping technique which is one of the strategies adopted to repair the leaks in the pipeline without disturbing the process is also covered in this course.
Overview
Syllabus
- ASME B31.1 - Power Piping, ASME B 31.3 - Process Piping, ASME B31.4 - Liquid Transportation Systems for Hydrocarbons, LPG, Ammonia and Alcohols
- This module deals with the ASME B31 Pressure piping series code sections such as ASME B31.1, ASME B31.3, and ASME B31.4. At the beginning, the evolution of the ASME B31 Pressure Piping series is briefed in this module and all the code sections included in ASME B31 Pressure Piping are mentioned. The layouts of the three important code sections are considered in this module to address the design procedure of power, process, and liquid transportation piping to meet the requirements mentioned in these code sections. These code sections are ASME B31.1, ASME B31.3, and ASME B31.4. ASME B31.1 – Power Piping Code section consists of seven chapters, ten mandatory appendices, and five non-mandatory appendices. The contents related to requirements presented in seven chapters of the ASME B31.1 code section are covered in such a way that the learner can become familiarised with all the paragraphs of the Power Piping Code section and ensure the piping design complies with the ASME B31.1 code section. ASME B31.3 – Process Piping Code section consists of ten chapters and twenty mandatory appendices. All appendices are mandatory and no non-mandatory appendix. The contents presented in ten chapters of the ASME B31.3 code section are covered lucidly. Process piping systems are subjected to different kinds of services such as toxic, non-toxic, flammable, non-flammable, elevated temperature, high pressure, high purity, and normal. Therefore, the contents of this code section based on requirements are systematically covered so that learners cannot face difficulty while designing the piping system and comply with the ASME B31.3 code section. ASME B31.4 code section covers pipeline transportation systems for liquids. This particular code section consists of nine chapters and two appendices. ASME B31.4 additionally covered corrosion control. It also covers the requirements for offshore pipelines. This particular code section is briefed in this module so that the learner can also become familiar with the important paragraphs and the concerned requirements for designing the pipeline to comply with this code section.
- Cross-Country Onshore Pipeline Construction
- Cross-country pipelines are mostly underground and hence they are invisible. This is the reason why they don’t get their due recognition from the general public regarding the amount of contribution that is being made by the pipelines in terms of economic growth and security of any nation. These are the lifelines of the nations. Therefore, to start with, the advantages of cross-country pipelines over conventional transportation such as by road, rail, or shipping, are covered to bring awareness about the importance of these pipelines among the learners. Next, the activities involved in standard pipeline construction starting with ‘Right of Use’ or ‘Right of Way’ are covered. There is a sequence of activities involved in cross-country pipeline construction. Right of Way, Clearing, Grading, Stringing, Trenching, Lowering, Backfilling, Tie-in, Welding, Bending, Non-destructive testing, Field joint coating, Cathodic protection, Special installation on pipelines like Markers, and Cleanup are the activities discussed in detail in this specific module. The equipment and crew that are needed to perform these activities are specified so that learners can realize the type and gravity of each activity, and the quantum of work involved in each activity. Corrosion of pipelines is one of the threats posed by underground cross-country pipelines. Cathodic protection is an effective method of protecting buried pipes and ensuring pipeline integrity. The technique, design considerations, and major components of the cathodic protection system are covered. Open-cut method and its limitation while routing the pipelines across the obstacles and within urban areas are discussed. Types of Horizontal Earth Borings and how a tunnel is formed underneath the obstacle using the Horizontal Directional Drilling technique are covered. Key features, functions, and advantages of the thrust boring are explained. How the thrust boring is different from Micro-tunneling is also covered. Finally, several strategies to repair the leaks in the pipeline, what is hot tapping and its importance, and the hot tapping construction are meticulously covered in this specific module.
Taught by
Subject Matter Expert
