Class Central is learner-supported. When you buy through links on our site, we may earn an affiliate commission.

Skillshare

Pattern Making for Fashion Designing ~ PART 4 ~ Sleeves. Armholes. Cuff. Bishop, Bell, Puff, etc.

via Skillshare

Overview

Save Big on Coursera Plus. 7,000+ courses at $160 off. Limited Time Only!

Drafting Sleeves. Fitting Sleeves into Armhole. Drafting a Cuff. Bell Sleeve. Puff sleeve. Bishop sleeve. etc.

This Course is 'PART 4'of Pattern Making for Fashion Designing. In this Course we will focus on SLEEVES as well as Armholes, Cuffs, and various Sleeve Designs.

In this Course you will learn how to draft a Basic Sleeve (a Straight Sleeve) from scratch, using standard measurements.

You will learn how to resolve the problem of the sleeve not matching the armhole, by adjusting the sleeve to fit the armhole correctly.

You will learn new Terminology such as: Cap, Bicep Circumference, Elbow Circumference, Cap Height, Underarm Seam, Wrist Level.

We will use techniques such as “Slash-and-Spread” to ADD FULLNESS to a sleeve, and thus create new designs.

You will learn how to draft a CUFF.

The Course will show you how to draft:

  • Basic Sleeve (Straight Sleeve)

  • Puff Sleeve

  • Bishop Sleeve

  • Short Sleeve

  • Bell Sleeve

  • "Original Design" sleeve

  • Cuff

    Pattern Drafting is a very important aspect of the Design Process, it takes years of practice to perfect the craft. If you've taken PART 1, and PART 2, and PART 3, this Course will build on top of that, and will definitely elevate the skills necessary to perfect the art of pattern-making.

    We will review the TOOLSused in Pattern Drafting, such as: Hip Curve and French Curve and Notcher. And of course Scissors, ruler, pencil, and Dotted Paper and Manila Paper for drafting purposes.

    My other Pattern Making Courses go over the basic Terminology and Tools necessary for drafting and even though it is not mandatory that you take these other pattern classes, it would be beneficial to have some knowledge of pattern drafting.

    Enjoy the Course.

Syllabus

  • #1 - Introduction. Course content.
  • #2 - Drafting a Basic Sleeve. Tools needed.
  • #3 - Adjusting the Sleeve Cap to fit Armhole
  • #4 - Widening the Sleeve at Wrist Level.
  • #5 - Drafting a Cuff. Cuff opening. Pleats.
  • #6 - Adding fulness in the Sleeve Cap.
  • #7 - Bishop sleeve. Puff sleeve.
  • #8 - Adding fulness on Top and Bottom of sleeve.
  • #9 - Drafting a Bell Sleeve.
  • #10 - Conclusion.

Taught by

Nino Via

Reviews

Start your review of Pattern Making for Fashion Designing ~ PART 4 ~ Sleeves. Armholes. Cuff. Bishop, Bell, Puff, etc.

Never Stop Learning.

Get personalized course recommendations, track subjects and courses with reminders, and more.

Someone learning on their laptop while sitting on the floor.