Completed
How to solder the header pins to Raspberry Pi Pico
Class Central Classrooms beta
YouTube videos curated by Class Central.
Classroom Contents
Using the Raspberry Pi Pico, PCA9685 and MicroPython for Robotics
Automatically move to the next video in the Classroom when playback concludes
- 1 How to get the Raspberry Pi Pico and PCA9685 board to work with MicroPython
- 2 Goals of this session
- 3 What is the PCA9685 board?
- 4 Why you shouldn't power the PCA9685 board from the Pico
- 5 What is I2C?
- 6 How to troubleshoot I2C on the Pico & MicroPython
- 7 How to communicate with I2C
- 8 What are Number-Bases - Binary, Octal, Decimal and Hexadecimal?
- 9 How to store Octal, Binary and Hexadecimal numbers in MicroPython
- 10 Upload the servo.py and pca9685.py to the Pico
- 11 How to solder the header pins to Raspberry Pi Pico
- 12 Overview of the servo.py code
- 13 Overview of the pca9685.py code
- 14 The test program, how to move a servo with the PCA9685 board and Pico in MicroPython
- 15 How to fix the Bad SCL Pin or Bad SDA Pin error message
- 16 How to use I2C in MicroPython
- 17 How to scan the I2C bus in MicroPython on the Pico
- 18 How to use a Servo with the Pico and PCA9685 board in MicroPython
- 19 Charlie the Cricket Robot
- 20 Next Steps
