Completed
Mod-01 Lec-18 Feeder voltage regulation
Class Central Classrooms beta
YouTube videos curated by Class Central.
Classroom Contents
Power Electronics and Distributed Generation
Automatically move to the next video in the Classroom when playback concludes
- 1 Mod-01 Lec-01 Course introduction and overview
- 2 Mod-01 Lec-02 Distributed generation technologies
- 3 Mod-01 Lec-03 Distributed storage technologies
- 4 Mod-01 Lec-04 Distribution system protection
- 5 Mod-01 Lec-05 Circuit breaker coordination
- 6 Mod-01 Lec-06 Symmetrical component analysis and sequence excitation
- 7 Mod-01 Lec-07 Modeling of distribution system components
- 8 Mod-01 Lec-08 Protection components
- 9 Mod-01 Lec-09 Impact of distributed generation of distribution protection
- 10 Mod-01 Lec-10 Consumption and distribution grounding
- 11 Mod-01 Lec-11 Islanding of distribution systems
- 12 Mod-01 Lec-12 Modeling of islanded distribution systems
- 13 Mod-01 Lec-13 Distribution system problems and examples
- 14 Mod-01 Lec-14 Distribution system problems and examples continued
- 15 Mod-01 Lec-15 Anti-islanding methods
- 16 Mod-01 Lec-16 Solid state circuit switching
- 17 Mod-01 Lec-17 Relaying for distributed generation
- 18 Mod-01 Lec-18 Feeder voltage regulation
- 19 Mod-01 Lec-19 Grounding, distribution protection coordination problems and examples
- 20 Mod-01 Lec-20 Ring and network distribution
- 21 Mod-02 Lec-21 Economic evaluation of DG systems
- 22 Mod-02 Lec-22 Design for effective initial cost
- 23 Mod-03 Lec-23 Single phase inverters
- 24 Mod-03 Lec-24 DC bus design in voltage source inverter
- 25 Mod-03 Lec-25 Electrolytic capacitor reliability and lifetime
- 26 Mod-03 Lec-26 Inverter switching and average model
- 27 Mod-03 Lec-27 Common mode and differential mode model of inverters
- 28 Mod-03 Lec-28 Two leg single phase inverter
- 29 Mod-03 Lec-29 Distribution system problems, and examples
- 30 Mod-03 Lec-30 DG evaluation problems and examples
- 31 Mod-03 Lec-31 Switch selection in two level voltage source inverters and loss evaluation
- 32 Mod-03 Lec-32 Thermal model, management and cycling failure of IGBT modules
- 33 Mod-03 Lec-33 Semiconductor switch design reliability considerations
- 34 Mod-03 Lec-34 AC filters for grid connected inverters
- 35 Mod-03 Lec-35 AC inductor design and need for LCL filter
- 36 Mod-03 Lec-36 LCL filter design
- 37 Mod-03 Lec-37 Examples in power electronic design for DG systems
- 38 Mod-03 Lec-38 Examples in power electronic design for DG systems continued
- 39 Mod-03 Lec-39 Higher order passive damping design for LCL filters
- 40 Mod-03 Lec-40 Balance of hardware component for inverters in DG systems
